Anthony Conte
Articles
-
Clearing Entity Properties
Command Command Description ATCLEAR_ENTITY_PROPERTIES Clear all custom properties from selected devices Ribbon: FireCAD > Entity Properties > Clear Entity Properties Prerequisites A Fire...
-
Setting Address Overrides
Command Command Description ATSET_OVERRIDE_ADDRESS Set a manual address override on selected devices Ribbon: FireCAD > Circuits > Override Device Address Prerequisites A FireCAD project ...
-
Replacing Devices
Command Command Description ATREPLACE_DEVICES Replace selected block references with a project device Ribbon: FireCAD > Devices > Replace Selection With Device Prerequisites A FireCAD pr...
-
Relocating a Branch
Command Command Description ATRELOCATE_BRANCH Move devices from one branch point to another on the same circuit Prerequisites A FireCAD project must be open An active circuit must be sel...
-
Resizing Blocks
Command Command Description ATRESIZE_BLOCKS Resize selected block definitions to a specified height Prerequisites FireCAD must be loaded and licensed Block references must be selected or...
-
Updating a Project
Command Command Description ATUPDATE_PROJECT Open the Project Parts Update dialog to add or modify templates and devices Ribbon: FireCAD > File > Update Project Prerequisites A FireCAD p...
-
Decibel Loss Report - User Guide
FireCAD dB Loss Report - User Guide Overview The dB Loss Report is a lump sum-style aggregated report designed specifically for 25V and 70V audio speaker circuits. This report is the audio circuit ...
-
How to Create a Local Master Database File
Overview If you plan to customize your FireCAD database — for example, adding custom block definitions, cables, or devices — you need a local editable copy of the master database. This article walk...
-
Wirepath Routing in FireCAD
Overview This guide covers drawing, managing, and maintaining wirepath segments — the lines that represent circuit wiring paths between devices in your fire alarm system drawings. Prerequisites A ...
-
Input Circuit Selection Dialog
Command Command Description ATSET_DEVICE_INPUT_CIRCUITS Assign input circuit templates to selected devices Ribbon: FireCAD > Circuits > Set Device Input Circuits Prerequisites A FireCAD ...