Command
| Command | Description |
|---|---|
ATMANAGE_LOCKED_CIRCUIT_ADDRESSES |
Open the Locked Address Editor for the active circuit |
Prerequisites
- An active circuit must be selected in the Circuits palette
Overview
The ATMANAGE_LOCKED_CIRCUIT_ADDRESSES command opens the Locked Address Editor dialog, which provides a detailed view of all locked addresses on the active circuit. You can view, edit, or remove individual address locks from this interface.
Steps
- Select the target circuit in the Circuits palette
- Type
ATMANAGE_LOCKED_CIRCUIT_ADDRESSESin the AutoCAD command line - The Locked Address Editor dialog opens
- View and manage locked addresses:
- Edit individual locked address values
- Remove locks from specific devices
- Review the current lock status of all circuit devices
- Click OK to apply changes, or Cancel to discard
- Device labels update to reflect any changes
When to Use
- You need to change a specific locked address without unlocking the entire circuit
- You want to review which addresses are locked and which are dynamic
- You need to fix an address conflict between locked addresses
Related Commands
FireCAD is the industry-leading AutoCAD add-in for fire alarm system design — from circuit layout to wire routing to code-compliant reports.
Learn more and get started at getfirecad.com →
Inspect Point Integration — Fire alarm system device lists and bill of materials can be pushed directly from FireCAD into Inspect Point, eliminating manual data entry and ensuring every device is ready for inspection scheduling and ongoing asset management.
Learn more here →