Creating a New Project (Preview)

Preview: this page describes the next FireCAD release, planned for December 1, and the beta available now. For the current release, see Creating a New Project.

Command

Command Description
ATCREATE_PROJECT Open the Project Creation Wizard

Ribbon: FireCAD > File > Create Project

Prerequisites

  • FireCAD must be loaded and licensed
  • If a project is open, you are asked to save and close it first

Overview

ATCREATE_PROJECT opens a two-step wizard. Step 1 sets up the project: its name and folder, its drawings, and the parts it uses. Step 2 is the project's properties, which fill the title block and cover sheet. You can skip step 2 and fill it in later.

Step 1 of 2: Project Setup

Field Description
Project Name The project's name, also used for its folder. Required
Project Directory The folder the project folder is created in
Settings Template (Optional) A saved settings file to start from, so label formats and options match your other projects
Project Drawings (Optional) The project's drawings. Click Templates to pick from the template gallery, or Browse to add drawings or templates from any folder
Database Connection The catalog the parts come from. Click Configure to change it
Selected Devices Click Add Devices to add individual parts
Project Templates Click Add Templates to add manufacturer templates, which bring in that manufacturer's parts and circuit templates

Select at least one project template or device.

Choosing the drawings

Click Templates to open the Drawing Templates gallery: FireCAD's own templates and the ones in your templates folder, each with a preview. Tick one or more and click Add Selected.

  • A template (.dwt) becomes a new drawing named after the project
  • A drawing (.dwg) is copied into the project as it is

See Project Templates and My Templates (Preview).

Step 2 of 2: Project Properties

The second step is the same form as Edit Project Properties: project information (occupancy, sub-group, occupant load, stories, sprinklered, issue phase and more), codes and standards with editions, references and enhanced language, and owner, contractor and engineer information. What you enter here prints in the title block and on the cover sheet. See Editing Project Properties (Preview).

  • Click Create Project to create it with these properties
  • Click Skip for Now to create the project and fill in the properties later with ATEDIT_PROJECT_PROPERTIES
  • Click Back to return to step 1

What Happens Next

FireCAD creates the project folder and project file, copies or creates the drawings, imports the selected templates and devices into the project, and opens the new project.

Tips

  • Import only the manufacturers you need. Add more later with ATUPDATE_PROJECT
  • Start from a FireCAD template, or your own saved template, so the title block and cover sheet are ready to fill in

Related Commands


FireCAD is the industry-leading AutoCAD add-in for fire alarm system design — from circuit layout to wire routing to code-compliant reports.
Learn more and get started at getfirecad.com →

Inspect Point Integration — Fire alarm system device lists and bill of materials can be pushed directly from FireCAD into Inspect Point, eliminating manual data entry and ensuring every device is ready for inspection scheduling and ongoing asset management.
Learn more here →

Was this article helpful?
0 out of 0 found this helpful