Preview: this page describes the next FireCAD release, planned for December 1, and the beta available now. For the current release, see Device Properties Palette.
Command
| Command | Description |
|---|---|
ATPROPERTIES |
Open a properties palette for the selected devices: building, floor, location and subscript |
Prerequisites
- A FireCAD project must be open
Overview
ATPROPERTIES opens a compact properties palette, like AutoCAD's own Properties window, for the devices you select. It is the quick way to fill in where devices are: their Building, Floor, Location and Subscript.
Looking for the grid with Property Name, Value, Is Visible, Display Order and Keep Value? That is the Set Entity Properties window, opened by
ATSET_ENTITY_PROPERTIES. See Entity Properties Dialog.
What the Palette Shows
| Field | Editable | Description |
|---|---|---|
| Part Number, Manufacturer | No | The selected device's part |
| Building | Yes | The building the device is in |
| Floor | Yes | The floor or level, as text |
| Location | Yes | The room or area, for example a room number |
| Subscript | Yes | The device's Subscript property |
| Existing | No | Whether the device is marked as existing |
| Riser Column, Riser Elevation | No | The device's riser column and floor number, set with the riser commands |
| Mounting Height | No | Reserved |
Apply Changes saves Building, Floor, Location and Subscript. The other fields are shown for reference.
Steps
- Type
ATPROPERTIES - At Select devices, select one or more devices and press Enter
- The palette opens with their properties
- Type the Building, Floor, Location or Subscript
- Click Apply Changes. Device labels refresh
- Click New Selection... to load different devices into the palette
Tips
- To set the riser floor, use Setting Elevations (Preview); to set the riser column, use Setting Riser Column
- To pick a room name from the architectural drawing instead of typing it, use Setting Location (Preview)
- For any other property, or to control which properties show on labels, use the Entity Properties Dialog. Property names there are matched without regard to capital letters, so the same property cannot be added twice under two spellings
Related Commands
-
Entity Properties Dialog -
ATSET_ENTITY_PROPERTIES -
Setting Panel Name (Preview) -
ATSET_PANEL_NAME -
Formatting Device Labels -
ATFORMAT_DEVICE_LABELS
FireCAD is the industry-leading AutoCAD add-in for fire alarm system design — from circuit layout to wire routing to code-compliant reports.
Learn more and get started at getfirecad.com →
Inspect Point Integration — Fire alarm system device lists and bill of materials can be pushed directly from FireCAD into Inspect Point, eliminating manual data entry and ensuring every device is ready for inspection scheduling and ongoing asset management.
Learn more here →