Preview: this page describes the next FireCAD release, planned for December 1, and the beta available now. For the current release, see Setting Elevations.
Command
| Command | Description |
|---|---|
ATSET_ELEVATIONS |
Give selected devices a floor (elevation) number for the riser |
Ribbon: FireCAD > Riser > Set Device Elevations
Prerequisites
- A FireCAD project must be open
Overview
In FireCAD, a device's elevation is the floor or level it is on, as a whole number: 1 for the first floor, 2 for the second, and so on. The riser diagram uses it to put each device on the right floor. It is not a mounting height, and it is not used in voltage drop or wire length calculations.
Steps
- Type
ATSET_ELEVATIONS, or click Set Device Elevations on the ribbon - At "Select device(s) to set elevation:", select the devices on one floor
- At "Please type an elevation value:", type the floor number and press Enter
- Repeat for each floor
Using Elevations in the Riser
For the riser to use the elevations you set, open Riser Options and tick Apply Device Elevation & Column Assignments. You can name each floor (for example "LEVEL 1", "ROOF") with Elevation Names in Riser Options.
Tips
- Select a whole floor plan's devices at once and give them one number
- To fix a device's horizontal position in the riser as well, use Setting Riser Column
Related Commands
FireCAD is the industry-leading AutoCAD add-in for fire alarm system design — from circuit layout to wire routing to code-compliant reports.
Learn more and get started at getfirecad.com →
Inspect Point Integration — Fire alarm system device lists and bill of materials can be pushed directly from FireCAD into Inspect Point, eliminating manual data entry and ensuring every device is ready for inspection scheduling and ongoing asset management.
Learn more here →