Preview: this page describes the next FireCAD release, planned for December 1, and the beta available now. For the current release, see Creating a Riser.
Watch the Video
Open the video in a new tab (Creating a Riser Diagram, 66 seconds).
Command
| Command | Description |
|---|---|
ATRISER |
Open the riser diagram creation dialog |
Ribbon: FireCAD > Riser > Create Riser Diagram
Prerequisites
- A FireCAD project must be open
Overview
Opens the riser diagram creation dialog, which generates a hierarchical visualization of circuit connections across floors or building levels. Riser diagrams show the vertical routing of circuits and the devices at each level.
Steps
- On the FireCAD Tools tab, open the Riser panel and choose Create Riser Diagram (or type
ATRISER). - The Riser Options window opens. In the Select Circuits pane on the left, choose the circuits to draw: Unselect All clears the list, and Include Initiating, Include NAC & Aux, Include Audio and Include Other... add circuits by type. You can also tick or untick single circuits.
- Check the Riser Settings pane on the right. Device Layout Style A shows each device and panel once. With Apply Device Elevation & Column Assignments on, each device's elevation decides which level it is drawn on.
- Optional: click Suggest Settings... (the wand icon) to have Riser IQ check the selected circuits and recommend settings such as wrapping, Draw Left, T-Tap Spurs, circuit priorities, combining and a trunk. Tick the suggestions you want and click Apply Ticked. See Riser Diagram V2 (Preview).
- Click Create Riser. A progress window shows while FireCAD lays out the circuits and draws the wire paths.
- Pick a point to place the riser. Each floor is drawn on its own level, with the panels and the devices on each circuit, colored by circuit. A settings table is added only when Generate Settings Table is ticked (off by default).
Tips
- The Riser Options window remembers its settings, including the per-circuit ones, for the next riser. Reset Settings to Default asks what to put back: the riser settings are ticked, and each circuit's Wrap, Draw Left, Priority and Typical are kept unless you tick them
- For a large riser going onto sheets, Fit To Viewport and Match Lines in Columns & Levels size it for one viewport and mark where the viewports meet
- Device riser column assignments (
ATSET_RISER_COLUMN) and elevations (ATSET_ELEVATIONS) determine device placement in the diagram - Riser text height and block scale are configured in Options & Configuration
- The riser layer is configurable in Options under the Layers tab
Related Commands
- Riser Diagram V2 (Preview) — Redesigned riser with per-circuit layout controls, dynamic color preview, and improved algorithms
- Riser from Selection
- Setting Riser Column
- Setting Elevations
FireCAD is the industry-leading AutoCAD add-in for fire alarm system design — from circuit layout to wire routing to code-compliant reports.
Learn more and get started at getfirecad.com →
Inspect Point Integration — Fire alarm system device lists and bill of materials can be pushed directly from FireCAD into Inspect Point, eliminating manual data entry and ensuring every device is ready for inspection scheduling and ongoing asset management.
Learn more here →