Command
| Command | Description |
|---|---|
ATDELETE_ALL_SEGMENTS |
Delete all wirepath segments from the active drawing |
Prerequisites
- A FireCAD project must be open
Overview
Erases all wirepath segment entities from the active drawing and deletes their corresponding database records. This is a destructive operation that requires confirmation.
Steps
- Type
ATDELETE_ALL_SEGMENTSin the AutoCAD command line - A confirmation prompt appears
- Confirm to proceed
- All segment entities are erased from the drawing
- All segment database records for the drawing are deleted
Important Notes
- This operation is destructive — all wirepath segments and their data are permanently removed
- Circuit connections remain intact; only the physical wirepath geometry is removed
- After deletion, you would need to redraw wirepaths using
ATAUTO_DRAW_CIRCUIT_WIREPATH
When to Use
- Starting fresh with wirepath routing
- When segment data has become severely corrupted
- Before reimporting or recreating all wirepaths
Related Commands
FireCAD is the industry-leading AutoCAD add-in for fire alarm system design — from circuit layout to wire routing to code-compliant reports.
Learn more and get started at getfirecad.com →
Inspect Point Integration — Fire alarm system device lists and bill of materials can be pushed directly from FireCAD into Inspect Point, eliminating manual data entry and ensuring every device is ready for inspection scheduling and ongoing asset management.
Learn more here →