Formatting Wirepath Labels

Command

Ribbon: FireCAD > Attributes > Format Wirepath Labels

Prerequisites

• A FireCAD project must be open

Overview

The ATFORMAT_WIREPATH_LABELS command opens a dialog for configuring how wirepath labels are displayed in the drawing. You can control which information appears in labels, text sizing, and formatting options.

Steps

1. Type ATFORMAT_WIREPATH_LABELS in the AutoCAD command line
2. The Format Wirepath Labels dialog opens
3. Configure label display options (visibility, formatting, content)
4. Click OK to apply
5. Wirepath labels update throughout the active drawing

Tips

• This dialog provides per-drawing control over label formatting — global defaults are set in Options & Configuration
• After formatting, labels regenerate without re-validating the drawing data

Related Commands

• Formatting Device Labels
• Refreshing Labels
• Options & Configuration

FireCAD is the industry-leading AutoCAD add-in for fire alarm system design — from circuit layout to wire routing to code-compliant reports.
Learn more and get started at getfirecad.com →

Inspect Point Integration — Fire alarm system device lists and bill of materials can be pushed directly from FireCAD into Inspect Point, eliminating manual data entry and ensuring every device is ready for inspection scheduling and ongoing asset management.
Learn more here →