Panel Layout (Preview)

Preview: this page describes the next FireCAD release, planned for December 1, and the beta available now. For the current release, see Panel Layout.

Command

Command Description
ATPANEL_LAYOUT Draw a card-by-card layout of every panel in the project

Prerequisites

Overview

ATPANEL_LAYOUT draws a layout of each panel in the project, showing its cards and the circuits on each card, with the first device label on each circuit. It covers every panel at once; there is no dialog or setting to choose.

The command is typed at the command line; it is not on the ribbon.

Steps

  1. Type ATPANEL_LAYOUT
  2. A Create Panel Layouts progress window shows while the layouts are built
  3. The layouts are drawn in model space. Zoom to find them and move them where you want them

Tips

  • Name your panels and cards first, so the layout reads the way your submittal does
  • Run it again after changing cards to draw an up-to-date set

Related Commands


FireCAD is the industry-leading AutoCAD add-in for fire alarm system design — from circuit layout to wire routing to code-compliant reports.
Learn more and get started at getfirecad.com →

Inspect Point Integration — Fire alarm system device lists and bill of materials can be pushed directly from FireCAD into Inspect Point, eliminating manual data entry and ensuring every device is ready for inspection scheduling and ongoing asset management.
Learn more here →

Was this article helpful?
0 out of 0 found this helpful