Preview: this page describes the next FireCAD release, planned for December 1, and the beta available now. For the current release, see Relocating an Entire Circuit.
Command
| Command | Description |
|---|---|
ATRELOCATE_CIRCUIT |
Move every device on one circuit onto another circuit |
Ribbon: FireCAD > Circuits > Relocate Panel Circuit
Prerequisites
- A FireCAD project must be open
- The active drawing must be part of the project
Overview
ATRELOCATE_CIRCUIT opens the Relocate Circuit window. You pick a circuit, then a compatible circuit to move it to, and FireCAD moves every device from the first circuit onto the second. Use it when you move a circuit to a different card or panel, or merge two circuits.
Steps
- Type
ATRELOCATE_CIRCUIT(or use the ribbon button) - In Select Circuit To Relocate, pick the circuit whose devices you want to move
- Select Compatible Destination Circuit lists the circuits that can take those devices. Pick one
- Click Apply. Every device on the first circuit moves to the destination circuit, and labels are refreshed
- The window stays open, so you can relocate the next circuit. Click Close when you are done
Tips
- Only circuits whose types can take the devices are offered as destinations
- To move one device's connections instead of a whole circuit, use Relocating a Device's Circuit Connections (Preview)
Related Commands
FireCAD is the industry-leading AutoCAD add-in for fire alarm system design — from circuit layout to wire routing to code-compliant reports.
Learn more and get started at getfirecad.com →
Inspect Point Integration — Fire alarm system device lists and bill of materials can be pushed directly from FireCAD into Inspect Point, eliminating manual data entry and ensuring every device is ready for inspection scheduling and ongoing asset management.
Learn more here →