Multileader Style

Overview

Wirepath labels are AutoCAD multileaders (MLeaders). FireCAD draws them with its own multileader style, AMTSMLeaderStyle. Riser labels use a second style, AMTSMLeaderStyle2. You do not need a command to set these up: FireCAD adds AMTSMLeaderStyle to the drawing when it opens and whenever it draws wirepath labels, and adds AMTSMLeaderStyle2 when it draws a riser.

Prerequisites

  • A FireCAD project must be open

Changing How the Leaders Look

To change the arrowhead, leader line or text of the labels, edit the style with AutoCAD's own multileader style manager.

  1. Type MLEADERSTYLE in the AutoCAD command line
  2. Select AMTSMLeaderStyle (or AMTSMLeaderStyle2 for riser labels) and click Modify
  3. Change the arrowhead, leader line type or text settings and click OK

FireCAD keeps your changes. It never resets the arrowhead, leader line type or text attachment of these styles.

Framing and Masking the Label Text

A frame around the label text and a background mask are set by FireCAD, not in the style manager.

  1. Type ATFORMAT_WIREPATH_LABELS (or click Format Wirepath Labels)
  2. Check or clear Mask Wirepath Label Text and Frame Wirepath Label Text
  3. Click OK

FireCAD updates the wirepath labels and copies the frame and mask settings into both styles, so riser labels follow too. Mask Wirepath Label Text is also in Options, on the Text and Attributes tab.

Notes

  • Earlier versions had the commands ATSET_DEFAULT_MLEADERSTYLE and ATUPDATE_DEFAULT_MLEADERSTYLE. They have been removed, and the style is now set up automatically. If a Set Default MLeader Style button on your ribbon reports Unknown command, use the steps above instead.

Related Commands


FireCAD is the industry-leading AutoCAD add-in for fire alarm system design — from circuit layout to wire routing to code-compliant reports.
Learn more and get started at getfirecad.com →

Inspect Point Integration — Fire alarm system device lists and bill of materials can be pushed directly from FireCAD into Inspect Point, eliminating manual data entry and ensuring every device is ready for inspection scheduling and ongoing asset management.
Learn more here →

Was this article helpful?
0 out of 0 found this helpful