Setting All Device Input Circuits

Command

Prerequisites

• A FireCAD project must be open
• The active drawing must contain entities

Overview

The ATSET_ALL_DEVICE_INPUT_CIRCUITS command applies input circuit assignments to all devices in the active drawing at once, rather than requiring you to select individual devices. This opens the same Input Circuit Selection dialog as ATSET_DEVICE_INPUT_CIRCUITS but operates on the entire drawing.

Steps

1. Type ATSET_ALL_DEVICE_INPUT_CIRCUITS in the AutoCAD command line
2. The Input Circuit Selection dialog opens with all drawing devices
3. Configure the circuit input assignments
4. Click OK to apply
5. Device labels are updated across the entire drawing

When to Use

• Initial setup of a drawing where all devices need input circuit configuration
• After importing devices that need bulk circuit assignment
• When changing circuit types across an entire drawing

Related Commands

• Setting Device Input Circuits

FireCAD is the industry-leading AutoCAD add-in for fire alarm system design — from circuit layout to wire routing to code-compliant reports.
Learn more and get started at getfirecad.com →

Inspect Point Integration — Fire alarm system device lists and bill of materials can be pushed directly from FireCAD into Inspect Point, eliminating manual data entry and ensuring every device is ready for inspection scheduling and ongoing asset management.
Learn more here →