Preview: new in the next FireCAD release, planned for December 1, and in the beta available now.
Command
| Command | Description |
|---|---|
ATFIND_STRAY_DEVICE_DATA |
Find blocks that carry FireCAD device data but are not FireCAD devices, and optionally remove the data |
This command is typed at the command line; it is not on the ribbon.
Overview
FireCAD stores a small data record on every device it places. Occasionally that record ends up on a block that is not a FireCAD device. Such a block can stop the drawing displaying correctly, and it is hard to find by eye.
Find Stray Device Data lists every block that carries FireCAD device data but is not a FireCAD device block, selects them, and offers to remove the data. The blocks themselves are always kept.
Steps
- Open the drawing
- Type
ATFIND_STRAY_DEVICE_DATAand press Enter - If nothing is found, the command line says that every block carrying FireCAD device data is a FireCAD device, and you are done
- Otherwise it lists each stray block with its handle, block name, layer and position, and selects them all
- Choose Yes to remove the FireCAD data from those blocks, or No to leave them as they are
- If you removed the data, run Validate so the project drops the records too
Tips
- With No, the blocks stay selected; use
ZOOM> Object to find them in the drawing - Removing the data does not delete or change the blocks, only FireCAD's record on them
Related Commands
FireCAD is the industry-leading AutoCAD add-in for fire alarm system design — from circuit layout to wire routing to code-compliant reports.
Learn more and get started at getfirecad.com →
Inspect Point Integration — Fire alarm system device lists and bill of materials can be pushed directly from FireCAD into Inspect Point, eliminating manual data entry and ensuring every device is ready for inspection scheduling and ongoing asset management.
Learn more here →