Preview: new in the next FireCAD release, planned for December 1, and in the beta available now.
Command
| Command | Description |
|---|---|
ATAREA |
Define named areas (rooms, corridors, zones) on the floor plan |
Ribbon: FireCAD Tools > Design Assistant > Define Area
Prerequisites
- A FireCAD project and a floor plan drawing must be open
Overview
An area is a named outline on the floor plan, such as Corridor 101, Mechanical Room or Level 2 East Wing. The Design Assistant uses areas to know where each space is when it lays out and reviews a design.
Define Area traces a room for you. Pick a point inside a space and FireCAD follows the walls around it: doorways are bridged, and grid lines and furniture are ignored. You then name the area, and FireCAD suggests the room label the plan already shows there. Each area is drawn as a closed polyline on the FA-AREAS layer, with an optional name label and hatch.
The Design Assistant can also define areas for you when you ask, for example "Define the rooms on this floor."
Steps
- On the FireCAD Tools tab, in the Design Assistant panel, click Define Area (or type
ATAREA) - Click inside a room. FireCAD traces the walls around the point
- Type a name, or press Enter to accept the room label shown as the default. The command line shows the area in square feet
- Click inside the next room, and repeat
- Press Enter or Esc when you are done. FireCAD reports how many areas were defined
Options at the Prompt
| Option | What it does |
|---|---|
| Ctrl+click | Join several spaces into one area: Ctrl+click the first space, click the others, then press Enter to name the whole area |
| Add | Add another space to the area you just defined |
| Edit | Pick an existing area, then Add spaces to it, Rename it, or Refresh its label and hatch after you have grip-edited its outline |
| Polyline | Draw the outline corner by corner, for a space with no walls around it |
| Select | Turn an existing closed polyline into an area |
| Options | Set whether to insert a name label and hatch, the widest doorway to bridge while tracing, and the layers to ignore while tracing |
When a Room Does Not Trace
If no closed boundary is found, FireCAD marks the point you picked with a red cross and circles in red any open wall ends nearby: the walls there do not meet. Then you can:
- Use Polyline to draw the outline yourself
- Use Options to widen the doorway gap, if the opening is a wide doorway or an open archway
- Use Options > ignored layers to hide a layer that is not a wall but sits across the room, such as furniture or ceiling grid. Frozen and turned-off layers are never traced
The options are saved with the project.
Related Commands
FireCAD is the industry-leading AutoCAD add-in for fire alarm system design — from circuit layout to wire routing to code-compliant reports.
Learn more and get started at getfirecad.com →
Inspect Point Integration — Fire alarm system device lists and bill of materials can be pushed directly from FireCAD into Inspect Point, eliminating manual data entry and ensuring every device is ready for inspection scheduling and ongoing asset management.
Learn more here →