Wire Fill Display

Commands

Prerequisites

• A FireCAD project must be open

Overview

Wire fill shows the number and type of wires running through each wirepath segment. These commands toggle wire fill visibility on individual segments.

Showing Wire Fill

1. Type ATSHOW_WIREFILL in the AutoCAD command line
2. Select one or more wirepath segments
3. Press Enter to confirm
4. Wire fill information appears on the selected segments
5. Wirepath labels refresh to include fill data

Hiding Wire Fill

1. Type ATHIDE_WIREFILL in the AutoCAD command line
2. Select one or more wirepath segments
3. Press Enter to confirm
4. Wire fill information is hidden on the selected segments

Deleting All Wire Fill

1. Type ATDELETE_ALL_WIREFILL in the AutoCAD command line
2. All wire fill labels are removed from the entire drawing

Tips

• Wire fill display can also be configured globally in Options & Configuration ("Show Segment ID In Wirepath Labels Instead Of Wirefill")
• To generate line types instead of text labels for wire fill, enable "Generate Line Types For Wirefill Instead Of Labels" in Options

Related Commands

• Conductor Count Display
• Conduit Fill Display

FireCAD is the industry-leading AutoCAD add-in for fire alarm system design — from circuit layout to wire routing to code-compliant reports.
Learn more and get started at getfirecad.com →

Inspect Point Integration — Fire alarm system device lists and bill of materials can be pushed directly from FireCAD into Inspect Point, eliminating manual data entry and ensuring every device is ready for inspection scheduling and ongoing asset management.
Learn more here →