Command
| Command | Description |
|---|---|
ATLIST |
Display a summary of selected devices' electrical properties |
Ribbon: FireCAD > Selection > List Device Circuit Requirements
Prerequisites
- A FireCAD project must be open
Overview
The ATLIST command calculates and displays a summary of the electrical properties for selected devices, including total watts, standby current, alarm current, and device count. The results are displayed in the AutoCAD command line.
Steps
- Type
ATLISTin the AutoCAD command line - Select one or more devices in the drawing
- Press Enter to confirm
- The command line displays totals:
- Total watts
- Total standby current
- Total alarm current
- Device quantity
When to Use
- Quick check of power requirements for a group of devices
- Verifying current draw before connecting devices to a circuit
- Estimating load during design
Tips
- This is a quick-reference tool — for detailed reports, use the export commands
- The values come from the device type definitions in the database
Related Commands
FireCAD is the industry-leading AutoCAD add-in for fire alarm system design — from circuit layout to wire routing to code-compliant reports.
Learn more and get started at getfirecad.com →
Inspect Point Integration — Fire alarm system device lists and bill of materials can be pushed directly from FireCAD into Inspect Point, eliminating manual data entry and ensuring every device is ready for inspection scheduling and ongoing asset management.
Learn more here →